QDD-400G-LR8-S
400G QSFP-DD Transceiver, 8×50G PAM4 over duplex SMF, 10km
Cisco transceiver
Specifications sourced from Cisco's published datasheets and product documentation.
Identity
What it is and which family it belongs to
- Vendor
- Cisco
- Type
- transceiver
- Description
- 400G QSFP-DD Transceiver, 8×50G PAM4 over duplex SMF, 10km
- Speed (G)
- 400
- Media
- single-mode
- Reach (m)
- 10000
- Optic form factor
- QSFP-DD
- Optic connector
- LC
- Wavelength (nm)
- 1310
- Cable type
- Duplex Fiber
Fits (3)
Every published chassis this part goes in
- N9364E-SG2-QNexus 9300
- N9K-C9804Nexus 9800 · 4 line-card slots
- N9K-C9808Nexus 9800 · 8 line-card slots
Other Cisco transceivers
12 of 137 same-type parts sharing a platform - the 12 sharing the most, never another vendor's
- QDD-400-CU1Mmedia: copper↓ 1 m reachcable: Preterminated cable400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
- QDD-400-CU2Mmedia: copper↓ 2 m reachcable: Preterminated cable400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
- QDD-400-CU3Mmedia: copper↓ 3 m reachcable: Preterminated cable400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
- QDD-400G-DR4-S↓ 500 m reachcable: Parallel Fiber400G QSFP-DD Transceiver, 400GBASE-DR4, MPO-12 parallel SMF, 500m
- QDD-400G-FR4-S↓ 2,000 m reach400G QSFP-DD Transceiver, 400G-FR4, Duplex LC, 2km Duplex SMF
- QDD-400G-LR4-Ssame published facts400G QSFP-DD Transceiver, 400G-LR4, Duplex LC, 10km Duplex SMF
- QDD-400G-SR4.2-BDmedia: multi-mode↓ 100 m reach400G QSFP-DD Transceiver, MPO-12, 100m OM4 MMF, 400GBASE-SR4.2 compliant. Can used for 4X breakout to QSFP-100G-SR1.2
- QDD-4X100G-FR-S↓ 2,000 m reachcable: Parallel FiberQSFP-DD Transceiver, 4x 100GBASE-FR1, MPO-12, 2km parallel SMF
- QDD-4X100G-LR-SQSFP-DD Transceiver, 4x 100GBASE-LR1, MPO-12, 10km parallel SMF
- QSFP-100G-LR4-S↓ 100G speedform factor: QSFP28100GBASE LR4 QSFP Transceiver, LC, 10km over SMF
- QSFP-100G-SL4↓ 100G speedmedia: multi-mode↓ 30 m reachform factor: QSFP28cable: Parallel Fiber100GBASE QSFP Short Link Transceivers, 30M reach over OM4 MMF
- QSFP-100G-SR4-S↓ 100G speedmedia: multi-mode↓ 100 m reachform factor: QSFP28cable: Parallel Fiber100GBASE SR4 QSFP Transceiver, MPO, 100m over OM4 MMF
About this data
Where the specifications on this page come from
Where does the QDD-400G-LR8-S data come from?
The QDD-400G-LR8-S specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.
Create a validated BOM with Cisco platform
SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.
To create a bill of materials for Cisco platform, you need to log in or create an account.