QDD-4X100G-LR-S

QSFP-DD Transceiver, 4x 100GBASE-LR1, MPO-12, 10km parallel SMF

Cisco transceiver

Specifications sourced from Cisco's published datasheets and product documentation.

Identity

What it is and which family it belongs to

Vendor
Cisco
Type
transceiver
Description
QSFP-DD Transceiver, 4x 100GBASE-LR1, MPO-12, 10km parallel SMF
Speed (G)
400
Media
single-mode
Reach (m)
10000
Optic form factor
QSFP-DD
Optic connector
MPO-12
Wavelength (nm)
1310
Breakout
yes

Fits (30)

Every published chassis this part goes in

Other Cisco transceivers

12 of 210 same-type parts sharing a platform - the 12 sharing the most, never another vendor's

  • QDD-400-CU1Mmedia: copper↓ 1 m reach400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
  • QDD-400-CU2Mmedia: copper↓ 2 m reach400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
  • QDD-400-CU3Mmedia: copper↓ 3 m reach400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
  • QDD-400G-DR4-S↓ 500 m reach400G QSFP-DD Transceiver, 400GBASE-DR4, MPO-12 parallel SMF, 500m
  • QDD-400G-FR4-S↓ 2,000 m reach400G QSFP-DD Transceiver, 400G-FR4, Duplex LC, 2km Duplex SMF
  • QDD-400G-LR4-S400G QSFP-DD Transceiver, 400G-LR4, Duplex LC, 10km Duplex SMF
  • QDD-400G-SR4.2-BDmedia: multi-mode↓ 100 m reach400G QSFP-DD Transceiver, MPO-12, 100m OM4 MMF, 400GBASE-SR4.2 compliant. Can used for 4X breakout to QSFP-100G-SR1.2
  • QDD-4X100G-FR-S↓ 2,000 m reachQSFP-DD Transceiver, 4x 100GBASE-FR1, MPO-12, 2km parallel SMF
  • QDD-2Q200-CU3Mmedia: copper400G, QSFP-DD to 2x QSFP56 200GBASE-CR4, Passive Copper Cable, 3 meters
  • QDD-2X100-CWDM4-S↓ 200G speed↓ 2,000 m reach2X 100G-CWDM4 Transceiver, 100G-CWDM4, Dual Duplex CS connector, 2km Duplex SMF
  • QDD-2X100-LR4-S↓ 200G speed2x100GBASE-LR4 Transceiver, 100GBASE-LR4, Dual Duplex CS connector, 10km SMF
  • QDD-2X100-SR4-S↓ 200G speedmedia: multi-mode↓ 100 m reach2x100GBASE-SR4 Transceiver, 100GBASE-SR4, MPO-24, 100m MMF

About this data

Where the specifications on this page come from

Where does the QDD-4X100G-LR-S data come from?

The QDD-4X100G-LR-S specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.

All Cisco transceivers

Create a validated BOM with Cisco platform

SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.

To create a bill of materials for Cisco platform, you need to log in or create an account.