QDD-400-CU2M

400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters

Cisco transceiver

Specifications sourced from Cisco's published datasheets and product documentation.

Identity

What it is and which family it belongs to

Vendor
Cisco
Type
transceiver
Description
400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
Speed (G)
400
Media
copper
Reach (m)
2
Optic form factor
QSFP-DD
Optic connector
none
Cable type
Preterminated cable

Fits (32)

Every published chassis this part goes in

Other Cisco transceivers

12 of 222 same-type parts sharing a platform - the 12 sharing the most, never another vendor's

  • QDD-400-CU1M↓ 1 m reach
  • QDD-400-CU3M↑ 3 m reach
  • QDD-400G-DR4-Smedia: single-mode↑ 500 m reachcable: Parallel Fiber400G QSFP-DD Transceiver, 400GBASE-DR4, MPO-12 parallel SMF, 500m
  • QDD-400G-FR4-Smedia: single-mode↑ 2,000 m reachcable: Duplex Fiber400G QSFP-DD Transceiver, 400G-FR4, Duplex LC, 2km Duplex SMF
  • QDD-400G-LR4-Smedia: single-mode↑ 10,000 m reachcable: Duplex Fiber400G QSFP-DD Transceiver, 400G-LR4, Duplex LC, 10km Duplex SMF
  • QDD-2X100-LR4-S↓ 200G speedmedia: single-mode↑ 10,000 m reachcable: Duplex Fiber2x100GBASE-LR4 Transceiver, 100GBASE-LR4, Dual Duplex CS connector, 10km SMF
  • QDD-2X100-SR4-S↓ 200G speedmedia: multi-mode↑ 100 m reachcable: Parallel Fiber2x100GBASE-SR4 Transceiver, 100GBASE-SR4, MPO-24, 100m MMF
  • QDD-400-AOC10Mmedia: aoc↑ 10 m reach400G QSFP-DD Active Optical Cable, 10m
  • QDD-400-AOC15Mmedia: aoc↑ 15 m reach400G QSFP-DD Active Optical Cable, 15m
  • QDD-400-AOC1Mmedia: aoc↓ 1 m reach400G QSFP-DD Active Optical Cable, 1m
  • QDD-400-AOC20Mmedia: aoc↑ 20 m reach400G QSFP-DD Active Optical Cable, 20m
  • QDD-400-AOC25Mmedia: aoc↑ 25 m reach400G QSFP-DD Active Optical Cable, 25m

About this data

Where the specifications on this page come from

Where does the QDD-400-CU2M data come from?

The QDD-400-CU2M specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.

All Cisco transceivers

Create a validated BOM with Cisco platform

SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.

To create a bill of materials for Cisco platform, you need to log in or create an account.