QSFP-100G-SR4-S

100GBASE SR4 QSFP Transceiver, MPO, 100m over OM4 MMF

Cisco transceiver

Specifications sourced from Cisco's published datasheets and product documentation.

Identity

What it is and which family it belongs to

Vendor
Cisco
Type
transceiver
Description
100GBASE SR4 QSFP Transceiver, MPO, 100m over OM4 MMF
Speed (G)
100
Media
multi-mode
Reach (m)
100
Optic form factor
QSFP28
Optic connector
MPO-12
Wavelength (nm)
850
Cable type
Parallel Fiber

Fits (33)

Every published chassis this part goes in

Other Cisco transceivers

12 of 225 same-type parts sharing a platform - the 12 sharing the most, never another vendor's

  • QSFP-100G-LR4-Smedia: single-mode↑ 10,000 m reachcable: Duplex Fiber100GBASE LR4 QSFP Transceiver, LC, 10km over SMF
  • QSFP-100G-AOC10Mmedia: aoc↓ 10 m reachcable: Preterminated cable100G QSFP28 Active Optical Cable, 10m
  • QSFP-100G-AOC15Mmedia: aoc↓ 15 m reachcable: Preterminated cable100G QSFP28 Active Optical Cable, 15m
  • QSFP-100G-AOC1Mmedia: aoc↓ 1 m reachcable: Preterminated cable100G QSFP28 Active Optical Cable, 1m
  • QSFP-100G-AOC2Mmedia: aoc↓ 2 m reachcable: Preterminated cable100G QSFP28 Active Optical Cable, 2m
  • QSFP-100G-AOC30Mmedia: aoc↓ 30 m reachcable: Preterminated cable100G QSFP28 Active Optical Cable, 30m
  • QSFP-100G-AOC3Mmedia: aoc↓ 3 m reachcable: Preterminated cable100G QSFP28 Active Optical Cable, 3m
  • QSFP-100G-AOC5Mmedia: aoc↓ 5 m reachcable: Preterminated cable100G QSFP28 Active Optical Cable, 5m
  • QSFP-100G-CU1Mmedia: copper↓ 1 m reachcable: Preterminated cable100G QSFP28 Passive Copper Cable, 1m
  • QSFP-100G-CU2Mmedia: copper↓ 2 m reachcable: Preterminated cable100G QSFP28 Passive Copper Cable, 2m
  • QSFP-100G-CU3Mmedia: copper↓ 3 m reachcable: Preterminated cable100G QSFP28 Passive Copper Cable, 3m
  • QSFP-100G-CU5Mmedia: copper↓ 5 m reachcable: Preterminated cable100G QSFP28 Passive Copper Cable, 5m

About this data

Where the specifications on this page come from

Where does the QSFP-100G-SR4-S data come from?

The QSFP-100G-SR4-S specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.

All Cisco transceivers

Create a validated BOM with Cisco platform

SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.

To create a bill of materials for Cisco platform, you need to log in or create an account.