QDD-2X400G-FR4

2x400G QSFP-DD800 FR4, 2x400GE + 800GE over dual duplex SMF, 2km

Cisco transceiver

Specifications sourced from Cisco's published datasheets and product documentation.

Identity

What it is and which family it belongs to

Vendor
Cisco
Type
transceiver
Description
2x400G QSFP-DD800 FR4, 2x400GE + 800GE over dual duplex SMF, 2km
Speed (G)
800
Media
single-mode
Reach (m)
2000
Optic form factor
QSFP-DD
Optic connector
LC
Wavelength (nm)
1310

Fits (1)

Every published chassis this part goes in

Other Cisco transceivers

12 of 18 same-type parts sharing a platform - the 12 sharing the most, never another vendor's

  • QDD-400-CU1M↓ 400G speedmedia: copper↓ 1 m reach400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
  • QDD-400-CU2M↓ 400G speedmedia: copper↓ 2 m reach400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
  • QDD-400-CU3M↓ 400G speedmedia: copper↓ 3 m reach400G, QSFP-DD to QSFP-DD, Passive Copper Cable, 0.5 meter, 1 meter, 2 meters, 2.5 meters, 3 meters
  • QDD-400G-DR4-S↓ 400G speed↓ 500 m reach400G QSFP-DD Transceiver, 400GBASE-DR4, MPO-12 parallel SMF, 500m
  • QDD-400G-FR4-S↓ 400G speed400G QSFP-DD Transceiver, 400G-FR4, Duplex LC, 2km Duplex SMF
  • QDD-400G-LR4-S↓ 400G speed↑ 10,000 m reach400G QSFP-DD Transceiver, 400G-LR4, Duplex LC, 10km Duplex SMF
  • QDD-400G-LR8-S↓ 400G speed↑ 10,000 m reach400G QSFP-DD Transceiver, 8×50G PAM4 over duplex SMF, 10km
  • QDD-400G-SR4.2-BD↓ 400G speedmedia: multi-mode↓ 100 m reach400G QSFP-DD Transceiver, MPO-12, 100m OM4 MMF, 400GBASE-SR4.2 compliant. Can used for 4X breakout to QSFP-100G-SR1.2
  • QDD-4X100G-FR-S↓ 400G speedQSFP-DD Transceiver, 4x 100GBASE-FR1, MPO-12, 2km parallel SMF
  • QDD-4X100G-LR-S↓ 400G speed↑ 10,000 m reachQSFP-DD Transceiver, 4x 100GBASE-LR1, MPO-12, 10km parallel SMF
  • QDD-800G-VR8media: multi-mode↓ 50 m reachQSFP-DD800 VR8, 800GBASE-VR8 over MMF, 50m OM4/OM5, dual MPO-12 APC
  • QDD-8X100G-FR8x100G QSFP-DD800 FR, 8x100GBASE-FR1 breakout over SMF, 2km, MPO-12 APC

About this data

Where the specifications on this page come from

Where does the QDD-2X400G-FR4 data come from?

The QDD-2X400G-FR4 specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.

All Cisco transceivers

Create a validated BOM with Cisco platform

SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.

To create a bill of materials for Cisco platform, you need to log in or create an account.