F5-UPG-SFPC-R
F5 1000BASE-T SFP copper transceiver, RJ45, 100 m. Category 5 cable minimum; F5 recommends Category 5e or Category 6.
F5 transceiver
Specifications sourced from F5's published datasheets and product documentation.
Identity
What it is and which family it belongs to
- Vendor
- F5
- Type
- transceiver
- Description
- F5 1000BASE-T SFP copper transceiver, RJ45, 100 m. Category 5 cable minimum; F5 recommends Category 5e or Category 6.
- Speed (G)
- 1
- Media
- copper
- Reach (m)
- 100
- Optic form factor
- SFP
- Optic connector
- RJ45
Fits (4)
Every published chassis this part goes in
Other F5 transceivers
Parts of the same type that fit the same platforms - never another vendor's
- F5-UPG-SFP-Rmedia: multi-mode↑ 550 m reachF5 1000BASE-SX SFP transceiver, 850 nm MMF, 550 m on 50.0 um fibre (275 m on 62.5 um).
- F5-UPG-SFP+-R↑ 10G speedmedia: multi-mode↑ 300 m reachform factor: SFP+F5 10GBASE-SR SFP+ transceiver, 850 nm MMF, 300 m on OM3 (82 m OM2 / 33 m OM1).
- F5-UPG-SFP+LR-R↑ 10G speedmedia: single-mode↑ 10,000 m reachform factor: SFP+F5 10GBASE-LR SFP+ transceiver, 1310 nm SMF, 10 km.
- F5-UPG-SFP28-LR↑ 25G speedmedia: single-mode↑ 10,000 m reachform factor: SFP28F5 25GBASE-LR SFP28 transceiver, 1295-1310 nm SMF, 10 km. rSeries only.
- F5-UPG-SFP28-SR↑ 25G speedmedia: multi-modeform factor: SFP28F5 25GBASE-SR SFP28 transceiver, 850 nm MMF, 100 m on OM4 (70 m OM3). rSeries only.
- F5-UPG-SFPLX-Rmedia: single-mode↑ 10,000 m reachF5 1000BASE-LX SFP transceiver, 1310 nm SMF, 10 km. MMF use requires mode-conditioning patch cords at both ends.
About this data
Where the specifications on this page come from
Where does the F5-UPG-SFPC-R data come from?
The F5-UPG-SFPC-R specifications on this page are sourced from F5's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not F5's datasheet, and the original documents are published by F5.
Create a validated BOM with F5 platform
SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.
To create a bill of materials for F5 platform, you need to log in or create an account.