This is the finished bill of materials from a recorded walkthrough — One floor, start to orderable bill of materials. Every line was produced by SKUit's own engine against the live catalog.
Watch how it was builtOne floor, start to orderable bill of materials
Saved August 15, 2026
Platform
C9300X-24HX
Use Case
Campus access layer
License Tier
Advantage
License Term
5Y
Fiber
multi-mode
Support
24x7x4
| Category | SKU | Description | Qty |
|---|---|---|---|
| switch | C9300X-24HX-A | 24-port 10G, multigigabit, 90W PoE | 2 |
| module | C9300X-NM-2C | Catalyst 9300X 2 x 100G/40G dual rate QSFP Network Module | 2 |
| power_supply | PWR-C1-1900WAC-P | Cisco 1900W AC Platinum Power Supply | 2 |
| fan | FAN-T2= | Cisco Catalyst 9300 hot-swappable 12-V fan module | 6 |
| stacking_cable | STACK-T1-1M | 1M Type 3 Stacking Cable | 1 |
| stacking_cable | STACK-T1-3M | 3M Type 3 Stacking Cable | 1 |
| transceiver | QSFP-100G-SR4-S | 100G QSFP28 SR4, 100m on OM4 MMF (MPO-12) (uplink) | 4 |
| licenserecurring | C9300-DNA-A-24-5Y | Cisco DNA Advantage, 24-port, 5-year term license | 2 |
| supportrecurring | SMARTnet 24x7x4 — C9300X-24HX · service PID quoted by reseller | SMARTnet 24x7x4 — C9300X-24HX · service PID quoted by reseller | 1 |
| power_stacking_cable | CAB-SPWR-30CM | 30cm StackPower cable | 1 |
| power_stacking_cable | CAB-SPWR-150CM | 150cm StackPower cable | 1 |
11 line items · 23 total units
Grew the deployment to a 2-switch stack so the full 4 requested uplink port(s) can be delivered (uplinks split across 2 stack members).
This configuration supports 48 x 10G access ports (24 per switch x 2 switches) for your 24-port requirement, 4 x 100G uplinks.
Ordered 6 fan modules (3 slots per switch x 2 switches). All fan slots should be populated for proper cooling and redundancy.
Power stacking (redundant): the 2 members share a ~2200W PSU pool; ~1900W is held in reserve stack-wide so the stack rides out one PSU loss (~300W usable vs a ~1220W declared load). No per-switch redundant PSU is added — the stack-level reserve replaces per-member N+1. Upgrade each member to **PWR-C1-1900WAC-P** (~1900W), or add a second PSU per switch, to size the pool to the load.
The unpopulated PSU bays on the C9300X-24HX ship with supplied blanking plates — provided with the chassis, not a separate line item.
Power cords are not included with power supplies. Order one power cord per power supply, matched to your shipping destination and facility power (plug type and voltage).
Standard 19-inch rack mount brackets ship with the switch — no separate order needed.