QSFP-4X10G-AOC2M

Cisco 40GBase-AOC QSFP to 4 SFP+ Active Optical breakout Cable, 2-meter

Cisco transceiver

Specifications sourced from Cisco's published datasheets and product documentation.

Identity

What it is and which family it belongs to

Vendor
Cisco
Type
transceiver
Description
Cisco 40GBase-AOC QSFP to 4 SFP+ Active Optical breakout Cable, 2-meter
Speed (G)
40
Media
aoc
Reach (m)
2
Optic form factor
QSFP+
Optic connector
none
Cable type
Preterminated breakout cable
Breakout
yes

Fits (29)

Every published chassis this part goes in

Other Cisco transceivers

12 of 209 same-type parts sharing a platform - the 12 sharing the most, never another vendor's

  • QSFP-40G-CSR-Smedia: multi-mode↑ 440 m reachcable: Duplex FiberCisco 40GBASE-CSR QSFP Module for Duplex MMF
  • QSFP-40G-CSR4media: multi-mode↑ 400 m reachcable: Parallel FiberCisco 40GBASE-CSR4 QSFP Module for MMF
  • QSFP-40G-ER4media: single-mode↑ 40,000 m reachcable: Duplex FiberCisco 40GBASE-ER4 Module for SMF with OTU-3 data-rate support
  • QSFP-40G-LR4media: single-mode↑ 10,000 m reachcable: Duplex FiberCisco 40GBASE-LR4 QSFP Module for SMF with OTU-3 data-rate support
  • QSFP-40G-LR4-Smedia: single-mode↑ 10,000 m reachcable: Duplex FiberCisco 40GBASE-LR4 QSFP Module for SMF
  • QSFP-40G-SR-BDmedia: multi-mode↑ 150 m reachcable: Duplex FiberCisco 40GBASE-SR Bi-Directional QSFP Module for Duplex MMF
  • QSFP-40G-SR4media: multi-mode↑ 150 m reachcable: Parallel FiberCisco 40GBASE-SR4 QSFP Module for MMF
  • QSFP-40G-SR4-Smedia: multi-mode↑ 150 m reachcable: Parallel FiberCisco 40GBASE-SR4 QSFP Module for MMF
  • QSFP-4SFP10G-CU1Mmedia: copper↓ 1 m reachCisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 1-meter, passive
  • QSFP-4SFP10G-CU2Mmedia: copperCisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 2-meter, passive
  • QSFP-4SFP10G-CU3Mmedia: copper↑ 3 m reachCisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 3-meter, passive
  • QSFP-4SFP10G-CU4Mmedia: copper↑ 4 m reachCisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 4-meter, passive

About this data

Where the specifications on this page come from

Where does the QSFP-4X10G-AOC2M data come from?

The QSFP-4X10G-AOC2M specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.

All Cisco transceivers

Create a validated BOM with Cisco platform

SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.

To create a bill of materials for Cisco platform, you need to log in or create an account.