QSFP-200G-FR4-S
200G QSFP56 FR4, 2km over duplex SMF (Dual Duplex LC)
Cisco transceiver
Specifications sourced from Cisco's published datasheets and product documentation.
Identity
What it is and which family it belongs to
- Vendor
- Cisco
- Type
- transceiver
- Description
- 200G QSFP56 FR4, 2km over duplex SMF (Dual Duplex LC)
- Speed (G)
- 200
- Media
- single-mode
- Reach (m)
- 2000
- Optic form factor
- QSFP56
- Optic connector
- LC
- Wavelength (nm)
- 1310
Fits (2)
Every published chassis this part goes in
Other Cisco transceivers
12 of 134 same-type parts sharing a platform - the 12 sharing the most, never another vendor's
- QDD-2Q200-CU3M↑ 400G speedmedia: copperform factor: QSFP-DD400G, QSFP-DD to 2x QSFP56 200GBASE-CR4, Passive Copper Cable, 3 meters
- QDD-2X100-CWDM4-Sform factor: QSFP-DD2X 100G-CWDM4 Transceiver, 100G-CWDM4, Dual Duplex CS connector, 2km Duplex SMF
- QDD-2X100-LR4-S↑ 10,000 m reachform factor: QSFP-DD2x100GBASE-LR4 Transceiver, 100GBASE-LR4, Dual Duplex CS connector, 10km SMF
- QDD-2X100-SR4-Smedia: multi-mode↓ 100 m reachform factor: QSFP-DD2x100GBASE-SR4 Transceiver, 100GBASE-SR4, MPO-24, 100m MMF
- QDD-400-AOC10M↑ 400G speedmedia: aoc↓ 10 m reachform factor: QSFP-DD400G QSFP-DD Active Optical Cable, 10m
- QDD-400-AOC15M↑ 400G speedmedia: aoc↓ 15 m reachform factor: QSFP-DD400G QSFP-DD Active Optical Cable, 15m
- QDD-400-AOC1M↑ 400G speedmedia: aoc↓ 1 m reachform factor: QSFP-DD400G QSFP-DD Active Optical Cable, 1m
- QDD-400-AOC20M↑ 400G speedmedia: aoc↓ 20 m reachform factor: QSFP-DD400G QSFP-DD Active Optical Cable, 20m
- QDD-400-AOC25M↑ 400G speedmedia: aoc↓ 25 m reachform factor: QSFP-DD400G QSFP-DD Active Optical Cable, 25m
- QDD-400-AOC2M↑ 400G speedmedia: aoc↓ 2 m reachform factor: QSFP-DD400G QSFP-DD Active Optical Cable, 2m
- QDD-400-AOC30M↑ 400G speedmedia: aoc↓ 30 m reachform factor: QSFP-DD400G QSFP-DD Active Optical Cable, 30m
- QDD-400-AOC3M↑ 400G speedmedia: aoc↓ 3 m reachform factor: QSFP-DD400G QSFP-DD Active Optical Cable, 3m
About this data
Where the specifications on this page come from
Where does the QSFP-200G-FR4-S data come from?
The QSFP-200G-FR4-S specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.
Create a validated BOM with Cisco platform
SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.
To create a bill of materials for Cisco platform, you need to log in or create an account.