GLC-BX40-DA-I
1000BASE-BX40-D (Alternative) for 40km Single-Fiber Bidirectional Applications; with DOM
Cisco transceiver
Specifications sourced from Cisco's published datasheets and product documentation.
Identity
What it is and which family it belongs to
- Vendor
- Cisco
- Type
- transceiver
- Description
- 1000BASE-BX40-D (Alternative) for 40km Single-Fiber Bidirectional Applications; with DOM
- Speed (G)
- 1
- Media
- single-mode
- Reach (m)
- 40000
- Optic form factor
- SFP
- Optic connector
- LC
- Wavelength (nm)
- 1490
- Cable type
- Single-strand Fiber
Fits (39)
Every published chassis this part goes in
- C9200CX-12P-2X2GCatalyst 9200CX
- C9200CX-12P-2XGHCatalyst 9200CX
- C9200CX-12T-2X2GCatalyst 9200CX
- C9200CX-8P-2X2GCatalyst 9200CX
- C9200CX-8P-2XGHCatalyst 9200CX
- C9200CX-8UXG-2XCatalyst 9200CX
- C9200CX-8UXG-2XHCatalyst 9200CX
- C9300-24SCatalyst 9300
- C9300-48SCatalyst 9300
- C9300X-12YCatalyst 9300X
- C9300X-24YCatalyst 9300X
- C9500-24Y4CCatalyst 9500
- C9500-48Y4CCatalyst 9500
- N9K-C92160YC-XNexus 9300
- N9K-C92348GC-FX3Nexus 9300
- N9K-C93108TC-FX3Nexus 9300
- N9K-C93108TC-FX3PNexus 9300
- N9K-C93128TXNexus 9300
- N9K-C9316D-GXNexus 9300
- N9K-C93180LC-EXNexus 9300
- N9K-C93180YC-FX3Nexus 9300
- N9K-C93216TC-FX2Nexus 9300
- N9K-C93240YC-FX2Nexus 9300
- N9K-C9332D-GX2BNexus 9300
- N9K-C9332PQNexus 9300
- N9K-C93360YC-FX2Nexus 9300
- N9K-C9336C-FX2Nexus 9300
- N9K-C9336C-FX2-ENexus 9300
- N9K-C9348D-GX2ANexus 9300
- N9K-C9348GC-FX3Nexus 9300
- N9K-C9348GC-FX3PHNexus 9300
- N9K-C9348GC-FXPNexus 9300
- N9K-C93600CD-GXNexus 9300
- N9K-C9364C-GXNexus 9300
- N9K-C9364D-GX2ANexus 9300
- N9K-C9372PX-ENexus 9300
- N9K-C9372TX-ENexus 9300
- N9K-C9396PXNexus 9300
- N9K-C9396TXNexus 9300
Other Cisco transceivers
12 of 205 same-type parts sharing a platform - the 12 sharing the most, never another vendor's
- GLC-BX-D↓ 10,000 m reach1000BASE-BX10-D downstream bidirectional single fiber; with DOM
- GLC-BX-U↓ 10,000 m reach1000BASE-BX10-U upstream bidirectional single fiber; with DOM
- GLC-BX40-D-Isame published facts1000BASE-BX40-D for 40km Single-Fiber Bidirectional Applications; with DOM
- GLC-BX40-U-Isame published facts1000BASE-BX40-U for 40km Single-Fiber Bidirectional Applications; with DOM
- GLC-BX80-D-I↑ 80,000 m reach1000BASE-BX80-D for 80km Single-Fiber Bidirectional Applications; with DOM
- GLC-BX80-U-I↑ 80,000 m reach1000BASE-BX80-U for 80km Single-Fiber Bidirectional Applications; with DOM
- GLC-EX-SMDcable: Duplex Fiber1000BASE-EX long-wavelength; with DOM
- GLC-LH-SMD↓ 10,000 m reachcable: Duplex Fiber1000BASE-LX/LH long-wavelength; with DOM
- GLC-LX-SM-RGD↓ 10,000 m reachcable: Duplex Fiber1000BASE-LX/LH long wavelength; rugged
- GLC-SX-MM-RGDmedia: multi-mode↓ 550 m reachcable: Duplex Fiber1000BASE-SX short wavelength; rugged
- GLC-SX-MMDmedia: multi-mode↓ 550 m reachcable: Duplex Fiber1000BASE-SX short wavelength; with DOM
- GLC-Tmedia: copper↓ 100 m reachcable: Cat5e/6A1000BASE-T standard
About this data
Where the specifications on this page come from
Where does the GLC-BX40-DA-I data come from?
The GLC-BX40-DA-I specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.
Create a validated BOM with Cisco platform
SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.
To create a bill of materials for Cisco platform, you need to log in or create an account.