C9300X-NM-BLANK

Insert this blank module when the switch has no uplink ports.

Cisco Catalyst 9300X network module

Specifications sourced from Cisco's published datasheets and product documentation.

Identity

What it is and which family it belongs to

Vendor
Cisco
Product family
Catalyst 9300X
Type
network module
Description
Insert this blank module when the switch has no uplink ports.

Fits (6)

Every published chassis this part goes in

Other Cisco Catalyst 9300X network modules

Parts of the same type that fit the same chassis - never another vendor's

  • C9300X-NM-2C↑ 2 portsCatalyst 9300X 2 x 100G/40G dual rate QSFP Network Module
  • C9300X-NM-8M↑ 8 portsCatalyst 9300X 8 x 10G/mGig copper Network Module
  • C9300X-NM-8Y↑ 8 portsCatalyst 9300X 8 x 25G/10G/1G multi-rate SFP Network Module
  • C9300X-NM-4C↑ 4 portsCatalyst 9300X 4 x 100G/40G dual rate QSFP Network Module

About this data

Where the specifications on this page come from

Where does the C9300X-NM-BLANK data come from?

The C9300X-NM-BLANK specifications on this page are sourced from Cisco's published datasheets and product documentation. SKUit extracts and normalises those values into its product catalog, the same data its BOM builder uses. This page summarises them; it is not Cisco's datasheet, and the original documents are published by Cisco.

All Cisco Catalyst 9300X platforms and parts

Create a validated BOM with Cisco Catalyst 9300X chassis

SKUit turns a use case into a complete, orderable bill of materials — the right platform, optics, licences and power, reconciled against the same validated data shown on this page.

To create a bill of materials for Cisco Catalyst 9300X chassis, you need to log in or create an account.